Once every three months, HIMSA recommends that you completely discharge, and then recharge your battery. This ensures that the rechargeable battery is always working to its fullest capacity, and also helps to extend its lifetime.
The entire process will take approximately 15 hours. You will be unable to turn on your NOAHlink while charging or discharging its battery.
| IMPORTANT: |
| HIMSA strongly recommends that you do not attempt to recharge any alkaline battery in the NOAHlink unit, even if the battery claims to be rechargeable. HIMSA has been made aware that some NOAHlink users use alkaline batteries in their NOAHlink unit which claim to be rechargeable. However, attempting to recharge these alkaline batteries with the NOAHlink charger has in some cases resulted in battery leakage and damage to the NOAHlink unit. Therefore, we strongly recommend that you do not attempt to recharge any alkaline battery in the NOAHlink unit, even if the battery claims to be rechargeable. |
- Place your NOAHlink unit in its charger cradle, matching the front of the cradle to the front of your unit.
- Attach the charger cradle to the power adaptor and plug this into a socket.
- Press the discharging button on the charger cradle. A red light at the front of the unit remains lit while discharging takes place.
- As soon as discharging is complete, the charger cradle automatically begins to recharge your NOAHlink and a green light is displayed. NOAHlink will be fully charged in approx. 13 hours.