| NOTE: |
| Your NOAHlink must be connected before you can use the Advanced Settings tab. |
The
Advanced Settings tab is used to set the following NOAHlink settings:
NOAHlink power off time: Select the length of idle time before NOAHlink turns off OR Select Off for it to remain on indefinitely.
HI power status:
Power on when leaving cradle: Select On for a previously powered on NOAHlink to power on automatically when removed from its cradle.
COM Port Settings: (NOTE - Only select new values if your system CANNOT locate NOAHlink.) Use the pull-down menus at COM Port low and COM Port high to select new values.