en-USde-DE
Support » NOAHlink Knowledgebase » Learning Center » Set Advanced Settings

Using the Advanced Settings Tab

NOTE:
Your NOAHlink must be connected before you can use the Advanced Settings tab.


The Advanced Settings tab is used to set the following NOAHlink settings:
 

AdvancedSettings.jpg

 

NOAHlink power off time: Select the length of idle time before NOAHlink turns off OR Select Off for it to remain on indefinitely.

HI power status:

  • Select On to turn on hearing instruments automatically when NOAHlink powers on.
  • Select Off for hearing instruments to be turned on through the fitting module.
Power on when leaving cradle: Select On for a previously powered on NOAHlink to power on automatically when removed from its cradle.
 
COM Port Settings: (NOTE - Only select new values if your system CANNOT locate NOAHlink.) Use the pull-down menus at COM Port low and COM Port high to select new values.