NOTE: Your NOAHlink must be connected before you can use parts of the Advanced Settings tab.
The Advanced Settings tab is used to set the following NOAHlink settings:
NOAHlink power off time: Select the length of idle time before NOAHlink turns off OR Select Off for it to remain on indefinitely.
HI power status:
- Select On to turn on hearing instruments automatically when NOAHlink powers on.
- Select Off for hearing instruments to be turned on through the fitting module.
Power on when leaving cradle: Select On for a previously powered on NOAHlink to power on automatically when removed from its cradle. COM Port Settings: (NOTE – Only select new values if your system CANNOT locate NOAHlink.) Use the pull-down menus at COM Port low and COM Port high to select new values.